OHH model Inlet 2" x Discharge 1"
Flow possible 13.00 cu.meter/hr around 58 GPM Head 202 FT
Pump Type OH2 , Casing Center line, Cased
End Suction ,Dicharge Top
Pressure : Discharge 86 psi
Driver Motor Siemens 3500 RPM Insulation Class F iiaiib
Duty Motor 415/460 50/60 Hz 3000 / 3500 rpm
OHH model Inlet 6" x Outlet 6", Impeller 8.7 to 9"
Flow possible 1200 to 1400 GPM Head 252.8 FT (Flow will increase with low head)
Pump Type OH2 , Casing Center line, End Suction , Discharge on side IMPELLER CASE STAINLESS Design Discharge pressure 117.5 ( Can be implement for higher pressure also upto 720 psi) Suction 20 psig
Driver Siemens 3500 RPM Insulation Class F iia iib
415/460 50/60 Hz 3000 / 3500 rpm
13.62 cu.meter/hr around 60 GPM GPM, Total Head 300 ft Type OH2, CCW End Suction.
Drive Motor Siemens 3500 Insulation Class F iiaiib TEFC 415/460 50/60 Hz 3000 / 3500 rpm
Nozzle 3" Inlet x 2" Outlet ( Connection 3" x 1.5")
End Suction x Discharge Top
Flow 272 cu.meter/hr <1200 to 1350 GPM>
[Impeller rating upto 1650 GPM/ 435 cu.meter/hr, 150 Ft Capability Suction 19.23 x 30 mtr]
Barrel Case/Impeller SS 316, Type OH2, Casing Center line, T NPSH 9.5 ft , Current Motor , 1750 RPM, Nozzle 10" Inlet x 8" (Outlet) (Connection 10" End suction x 8" Top Discharge)
Motor Siemens 1750 RPM Insulation Class F iiaiib TEFC
Ametek 2000 Thermox Flue Gas Analyzer, Stack Gas ,Combustion Oxygen Analyzer Industry Sulphur Recovery Unit, Sulphur treatment unit, Combustion Flue Gas Analyzer, Online Oxygen Analyzer, Zirconia O2 Analyzer, Zirconia Analyzer, Thermox o2 Analyzer, ametek thermox flue gas monitor series 2000, Flue Oxygen Gas Analyzer, Thermox WDG IV
This are found refinery crackers, Furnaces, Rotary Kilns reactors and steam generation equipment. to monitor efficiency of burnt fuels and inputs used and improve cost saving by burning fuels to its maximum capacity as well in environmental requirements and government controls measures the other elements related to carbon gases.
This is a engineered product and is to product that suits your line of activities and are of work.
Flue Gas Monitor - monitors combustion in fired heaters or boilers, furnaces,. It has redundancy and diagnostics to enable predictive and proactive maintenance programs, which helps reduce the risk of uncontrolled combustion events. The analyzer is certified for SIL 2 implementation into safety instrumented systems, and is suitable for process streams up to 3,200 °F (1,760 °C).
Simens Siemens Sample Preparation System for Chromatograph Analyzer GC Chromo Sample preparation assembly to filter, purify, control media suitable to chromatograph or analyzer, suitable to work with GC
In Stainless steel cabinet with pumps, heater, drain, controller sample pump, regulator and control, inbuilt heater block & bleed configuration, attached layout and system components.
Siemens Sample Conditioner (For Laboratory /Testing / Instruments/ or Impulse Line Sample) and looking for a prospect ; price is attractive.
Siemens Analyzer/Chromo Sample preparation assembly to filter, purify, control media suitable to chromatograph or analyzer , suitable to work with GC in Stainless steel cabinet with pumps, heater, drain , controller
Non Contact Industrial Duty continuous measurement Pyrometer for Ind. Use. Would like to know your interest in the same.
Infrared Temperature Infrared Pyrometer IR Temperature Sensor
Application: Furnace Boiler Reactor
It can measure temperature through flame, glass, plastics, and a variety of gases without affecting the reading, or, alternatively, it can measure the temperature of these and many other items. Because contact with the object being measured is not required, Range 1650 Deg C (3000 F) extended Temprature with sepcial calibration 2400Deg C
John Crane Mechanical Seal, JC Type 2800 Dry Gas Seal, Flowserve Seal QB 2500, Double Chamber Seal QB 2500, Nitrogen Gas Panel